Thinkstock
airplanetails.gif

Engineering Company Fined After Falls From Elevated Platforms Injure Two Workers

March 23, 2017
An aircraft engineering company in the UK has been fined after two men fell about 15 feet while they were carrying out checks at the tail of an airplane.

Two employees suffered serious injuries when they were knocked off of the elevated platforms they were using to conduct service checks on the tail of an airplane.

Chelmsford Magistrates’ Court heard the case of the employees – an employee of Inflite Engineering Services and a worker from a temporary agency – who suffered broken bones after the fall at Stansted Airport on June 10, 2015.

They were working from mobile elevated work platforms on either side of the tail when another employee closed the wrong circuit breaker, inadvertently opening the plane’s airbrake, which knocked over both platforms.

The men fell between 10 to 15 feet. One employee, a 62-year-old man, suffered three fractures to his pelvis, a broken back, three broken ribs, a fractured elbow and a punctured right lung. The second man, 60, suffered a broken wrist and a chipped bone on his spine.

A Health and Safety Executive (HSE) investigation found that no suitable risk assessment was in place and there was a lack of effective monitoring.

On March 15, Inflite Engineering Ltd., based a Stansted Airport, pleaded guilty to breaches under Sections 2 and 3 of the Health and Safety at Work Act 1974. The company was fined £160,000 (US$200,080) and ordered to pay costs of £5,492.90. HSE is Britain’s national regulator for workplace health and safety.

“Both of these men suffered shocking injuries after falling from height, which could easily have been a double fatality,” said HSE Inspector Tania van Rixtel, speaking at the conclusion of the case. “Our investigation found the incident could have been avoided had adequate monitoring been taking place. Aircraft maintenance companies are reminded that not all risks are covered by the Aircraft Maintenance Manual and additional measures need to be introduced.”

About the Author

Sandy Smith

Sandy Smith is the former content director of EHS Today, and is currently the EHSQ content & community lead at Intelex Technologies Inc. She has written about occupational safety and health and environmental issues since 1990.

Sponsored Recommendations

Finding the Balance Between Protection, Performance and Comfort

Feb. 28, 2025
There’s more to picking out the right cut-resistant glove than just choosing the one with the highest cut protection; different jobs require certain types of protection, and too...

Take This Quiz to Find Your Safety Glove Personality

Feb. 28, 2025
What’s your HyFlex®?

Revolutionary Hybrid Technology Delivers a Breakthrough in Chemical Performance

Feb. 28, 2025
Ansell AlphaTec® 53-002 with MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemical...

Unprecedented Chemical Protection and Comfort

Feb. 28, 2025
AlphaTec 53-003 gloves provide extreme chemical protection as well as protection against secondary hazards like mechanical and heat risks. A nylon liner enhances comfort and sweat...

Voice your opinion!

To join the conversation, and become an exclusive member of EHS Today, create an account today!